CR 09-088 - Add validation rule to support section 5.1 of v2.1 GDSN Operations Manual

Adds an additional validation rule to support section 5.1 of the v2.1 Operations Manual.  Section 5.1 states: "Code list Validation - The following rule allows optional rejection of codes: "The recipient has the right (but not the obligation) to reject values for all attributes for which a standard code list applies, if the value in question is not a member of the code list that applies to that attribute." There is a need to create a validation code and value for when this occurs and the datapool rejects the message based on an invalid code list entry. The validation rule may possibly have just one number for all violations of all code lists.  It may be more complex to have a number for each code list used. The eBallot contains a link to CR 09-088 in the CR system and the Business Requirement Spreadsheet.

CR 09-103 - Round 5 of GDSN Validations Rules (#493-498)

Consolidates under a single work-order change requests numbers 08-230, 08-245 and 08-249 submitted by GS1 Australia, GS1 Netherlands and GS1 Sweden. This eBallot contains a link to Change Request 09-103, VR 493-498 summary document  and the Business Requirement

CR 09-187 - Add attribute for Child Nutrition label (USDA Guidelines) 

Adds an optional attribute(s) with a code list to denote if an item carries a Child Nutrition label in accordance with USDA Guidelines.  The USDA Child Nutrition (CN) Labeling Program provides food manufacturers the option to include a standardized food crediting statement on their product label. Labels must be approved by USDA, FNS prior to use and manufacturers must have quality control procedures and inspection oversight that meet the FNS requirements. Products produced in accordance with the CN Labeling Program are generally purchased by foodservice providers for FNS meal programs.  http://www.fns.usda.gov/cnd/cnlabeling/default.htm This to be a fast track attribute until the formal attribute is added.

CR 09-190 - Move the Code List for "EANUCCtype" 

Moves the current code list (below) for the "EANUCCtype" attribute to "additionalTradeItemIdentificationType" attribute. The attribute originally existed in the Barcode item data extension. Note that a number of older, no longer valid codes are included in this change. These are legacy EDI codes that will be available to existing implementations and removed from this code list in conjunction with the next major release. This is a simple Level Of Impact 2.

The codes and their definitions are:
A. EN : EAN.UCC-13 - GTIN-13, formerly, EAN.UCC-13
1). Code used to identify the GTIN-13 which is the 13-digit GS1 Identification Key composed of a GS1 Company Prefix, Item Reference, and Check Digit used to identify trade items.  The respective lengths of GS1 Company Prefix, Item Reference, and Check Digit may vary but will always add up to 13 digits
B. EO : EAN.UCC-8 - GTIN-8, formerly, EAN.UCC-8
1). Code used to identify the GTIN-8 which is the 8-digit GS1 Identification Key composed of a GS1-8 Prefix, Item Reference, and Check Digit used to identify trade items.  The respective lengths of GS1-8 Prefix, Item Reference, and Check Digit may vary but will always add up to 8 digits.
C. U2 : UPC Shipping Container Code
1) Code formatted as:
a. 1 digit packaging indicator
b. 2 digit number system character
c. 10 digit GS1 Company Prefix and Item Reference
2) The respective lengths of GS1 Company Prefix and Item Reference may vary but will always add up to 10 digits.
3) Legacy X12 EDI code that describes a unique number used to identify a manufacturer s shipping unit. 
D. UA : UPC/EAN Case Code
1) Code formatted as:
a) 2 digit number system character
b) 10 digit GS1 Company Prefix and Item Reference
2) The respective lengths of GS1 Company Prefix and Item Reference may vary but will always add up to 10 digits.
3) Legacy X12 EDI code that describes a 12-digit unique number with no check digit used to identify a shipping unit (Case). 
E. UD : UPC/EAN Consumer Package Code
1) Code formatted as:
a) 2 digit number system character
b) 10 digit GS1 Company Prefix and Item Reference
2) The respective lengths of GS1 Company Prefix and Item Reference may vary but will always add up to 10 digits.
3) Legacy X12 EDI code that describes a 12-digit unique number with no check digit used to identify a UPC package code. 
F. UE : UPC/EAN Module Code
1) Code formatted as:
a) 2 digit number system character
b) 10 digit GS1 Company Prefix and Item Reference
2) The respective lengths of GS1 Company Prefix and Item Reference may vary but will always add up to 10 digits.
3) Legacy X12 EDI code that describes a unique number used to identify a module (pallet) which contains multiple shipping units. 
G. UG : Drug UPC Consumer Package Code
1) Code formatted as:
a) 1 digit number system character
b) 10 digit GS1 Company Prefix and Item Reference
c) 1 digit check digit
2) The respective lengths of GS1 Company Prefix and Item Reference may vary but will always add up to 10 digits.
3) Legacy X12 EDI code that describes a unique number used to identify a consumer unit. 
H. UH : Drug UPC Shipping Container Code
1) Code formatted as:
a) 1 digit packaging indicator
b) 2 digit number system character
c) 10 digit GS1 Company Prefix and Item Reference
d) 1 digit check digit
2) The respective lengths of GS1 Company Prefix and Item Reference may vary but will always add up to 10 digits.
3) Legacy code X12 EDI that describes a unique number used to identify a shipping unit. 
I. UI : UPC Consumer Package Code
1) Code formatted as:
a) 1 digit number system character
b) 10 digit GS1 Company Prefix and Item Reference
2) The respective lengths of GS1 Company Prefix and Item Reference may vary but will always add up to 10 digits.
3) Legacy X12 EDI code that describes a unique number used to identify a customer unit. 
J. UK : EAN.UCC-14
1) Code formatted as:
a) 1 digit packaging indicator
b) 2 digit number system character
c) 10 digit GS1 Company Prefix and Item Reference
d) 1 digit check digit
2) The respective lengths of GS1 Company Prefix and Item Reference may vary but will always add up to 10 digits.
3) Legacy X12 EDI code that describes a unique number used to identify a manufacturer s shipping unit. 
K. UN : UPC Case Number
1) Code formatted as:
a) 1 digit packaging indicator
b) 1 digit number system character
c) 10 digit GS1 Company Prefix and Item Reference
2) The respective lengths of GS1 Company Prefix and Item Reference may vary but will always add up to 10 digits.
3) Legacy X12 EDI code that describes a unique number used to identify the manufacturer s shipping unit. 
L. UP : UCC-12 - GTIN-12, formerly, UCC-12
1) Code formatted as:
a) 1  10 digit GS1 Company Prefix and Item Reference
b) 1 digit check digit
2) The respective lengths of GS1 Company Prefix and Item Reference may vary but will always add up to 10 digits.
3) Code used to identify the GTIN-12 which is the 12-digit GS1 Identification Key composed of a GS1 Company Prefix, Item Reference, and Check Digit used to identify trade items.